The knowledge of use Vertical roller mill

News Date:2019-10-30 14:19:39

Vertical roller mill is an indispensable equipment in the production of cement/shop/grinding station. chaeng has been making excellent improvements to the vertical roller mill in the development of vertical mills, so that the equipment can fully meet the production standards and win customers highly praised.

 cement/shop/grinding station

The vertical roller mill should check the oil level change of the fuel tank frequently for a period of time after starting, especially for the grinding roller. During this time,oil temperature is low and the oil return temperature is low, which makes the oil return difficult. It may be better when the temperature is high in summer. It is best to manually heat the oil temperature of the fuel tank to about 50 degrees before the winter is started. (Note: When the fuel tank is heated to 25 degrees or more, the oil supply pump should be turned on, so that the oil goes inside, but not Pass the cooler. This not only makes the oil tank temperature uniform but also heats up).

When the oil is low, the oil supply should be controlled to ensure the oil level of the fuel tank. (If necessary, the oil supply pressure may not be supplied but maintain a certain oil supply pressure.) As the oil temperature rises and the oil return improves. Gradually increase the amount of oil supplied (ie, the oil supply pressure). During the long-term stable operation of the mill, the oil supply flow rate should be maximized while the oil supply is cooled by the cooler to ensure the safe operation of the roller bearings, but at the same time maintain a certain amount of fuel tank oil level.

Although the vertical roller mill is simple to operate, some small details need to be noted. The correct use of the vertical mill can improve the product yield and quality.

Service & support