Vertical Mills Grinding table body main consists the disc tray, linings, compact, gauge rings, scraper plate, air ring, wind boards and other parts.The primary function is to support the disc material bed, and the force generated transmission roller to the lower part of the gear, it will also transmit torque to the gear grinding area. Disc with duct together form an annular chamber, the wind from the chamber flows out through the vent ring into the grinding chamber.

1. The plate body

The disc is a large rotating cast by a bolt with a drive gear connected to the flange. Mills gear torque by two cylindrical arch key and bolt from the friction plate after tightening the flange body produced by absorption.

The disc is a horizontal plane, in order to protect the plate body, do the above liner.Grinding rollers force generated by the disc incoming reducer.

2. liners and briquetting

Vertical Grinding mills liners constitute a track lined with abrasion resistant lining is made of cast steel wear resistant materials. Liners are divided into several blocks, all together liner is a circular plate. Inner circle at each lining has a smooth slope, compact through this ramp will be pressed against the backing plate body.