03 Nov,2015 UTC+8 Views:
1. Activity is higher than the traditional shaft kiln 30ml
The material heated evenly in the revolving lime kiln, the probability of mild and excessive calcination is low. The lime activity degrees produce by lime rotary kiln is higher than the shaft kiln. The lime activity can reach up to 400ml.
2.Production capacity reaches up to 1500 t/d
The lime kilns produced by Great Wall Machinery have large capacity, the output can reach to 1500t/d, operating well to guarantee enterprise up-scaling and reduce the production cost.
|
Kiln type
Parameter
|
Great Wall kilns
|
shaft kilns
|
earth kilns
|
|
Capacity（t/d）
|
200-1200
|
50-300
|
10-70
|
|
Raw material granularity
|
15-50mm
|
40-80mm
|
70-250mm
|
|
Standard coal consumption
|
≥180kg/t
|
120-145 kg/t
|
200-300 kg/t
|
|
Lime activity
|
330-400ml(The influence of fuel ash and sulfur content increase on lime activity is not obvious)
|
260-300ml（the increase of fuel ash and sulfur content significantly reduce lime activity)
|
200-240ml（the increase of fuel ash and sulfur content significantly reduce lime activity）
|
|
Ignition loss
|
less than5%
|
about 10%
|
20%
|
3. Auto-control reduce the labor cost
Auto-control by using DCS remote control system, only need 2-3 operating personnel in the whole line.
4 Good quality of finished products, low probability of mild and excessive calcination
Product quality is uniform, the probability of mild and excessive calcination less than 8%.
5 Gas fuel, energy saving and environmental protection
Great Wall lime kiln belongs to open type calcination equipment with advanced manufacturing technique，lower energy consumption than the old lime kiln calcination system and more environmental protection for adopts the exhaust blast furnace gas.
