The lime production line occupies a relatively large area. For example, the lime rotary kiln equipment in the lime kiln production line weighs several hundred tons. It is supported by tugs and tires to rotate at a constant speed. Of course, because the tugs bear relatively high pressure, long-term operation will cause The tug has cracks and other problems. Of course, there are also cracks in the tyre. Once the tyre has a crack and needs to be replaced, it is more difficult. So how to repair the broken tyre of rotary kiln in lime kiln production line?

The tyre is welded to the lime rotary kiln shell through a backing plate, so if you want to change the tyre, you need to find a suitable position near the tyre to cut the lime rotary kiln shell, and you must use a support to cut the lime before cutting. The rotary kiln is supported and fixed, and then the kiln shell in the middle is removed through two cuts, and then the tyre is installed. After installation, the crane is lifted and fixed, and the welding is carried out after the measurement. The welding process takes a long time and the welding process is unconventional welding. Therefore, the requirements for the level of welders are relatively high. After the welding is completed, it can be accepted after the flaw detection is passed, and the support and the crane can be retracted.

Xinxiang Great Wall is not only a lime kiln manufacturer, but we also have a parts foundry, so we will solve it for you from equipment production, technical services and parts casting. If you encounter the problem of replacing the rotary kiln tyre , You can contact us, we will provide you with high-quality products and professional technical support, and look forward to cooperating with you!