3000 t/d Cement Plant
Home>Solutions

Introduction

Chaeng Machinery provides turnkey basis service globally with everything that cement plants need. We provide service include engineering, manufacturing, procurement, installation, debugging and training for 3000 t/d cement plant project. The equipment is composed of the low-resistance and high-efficiency five-stage preheating and decomposition system, dry processφ4×60m rotary kiln, inflatable beam grate cooler, advanced vertical roller mill grinding system and DCS automatic control system.

Get solution and support:
I am interested in (*) , raw material is , the production capacity is t/h, send email to (*) . Name: (*) Phone: Country:

3000 t/d Cement Plant Features

Vertical mill for Raw Material Preparation

Raw material preparation uses GRMR40.41 vertical mill that developed by Chaeng. GRMR40.41 vertical mill is a kind of grinding equipment with these advantages: simple process, strong drying ability, safe and reliable operation, high grinding efficiency, low power consumption, easy maintenance and short debugging cycle, etc.

Clinker burning system with lower energy and heat consumption

This production line adopts advanced raw preheating and precalcining system, reducing the heat consumption and energy consumption effectively in clinker calcined phase. The clinker has better performance, and is easier to grind. Exhaust gases from the preheater enters into the mill, which both saves energy and reduces environmental pollution.

Efficient cement mill producing high quality cement

The specific surface of cement produced by cement grinding mill φ4.2×13m is 3300-3800 cm²/g, which meets even beyond the common standard. In the process of using, the cement has the advantage of quick hydration reaction and fast strength development.

Good pollution control, greening of factory

This production line fully considers waste and dust treatment in the design process. We install bag filter and electrical deduster in the main stage of dust treatment, reducing the dust in the air effectively. The whole factory area is fully greening, bringing a good working condition.

 

No. Product Model Specification QTY Capacity (t/h)
1 Single stage hammer crusher   Feeding size <1200x900x900mm 
product size <70mm R95% 
motor: 600kW
1 400
2 Cantilever stoker   1 500
3     Bridge-type scraping reclaimer 1 250
4 Raw Meal Vertical roller mill   feeding size: <75mm 
product fineness: <12% R90 
feeding moisture: max.6.5% 
product moisture: <0.5% 
motor: ~2000kW
1 200
5 Kiln and electric dust collector of raw mill   Air volume: ~480000m³/h 
Dust collect area: ~161m2 
Inlet temperature: 100~150℃ 
Inlet dust: <80g/Nm3 
Outlet dust: <70mg/Nm3
1set  
6 Five-stage Preheater and precalciner    C1: 2-Φ4500mm 
C2, C3: Φ6460mm 
C4, C5: Φ6760mm 
predecomposition: Φ5060mm 
differential pressure: <5500Pa 
gas temperature of outlet.: 320℃
1set 2500t/d
7 Rotary kiln Φ4.2x60m Kiln pitch: 4% 
Rotate speed: 0.4~4r/min. 
motor: 450kW
1 2500t/d
8 Grate cooler   Effective area: ~62.m2 
clinker temperature of inlet: ~1350℃ 
clinker temperature of outlet: 65℃ 
discharging size: <25mm 
heat efficiency: >72%
1  
9 Electric dust collector of grate cooler   Air volume: 315000m3/h 
Dust collect area: ~103.5m2 
Air temperature of inlet:  220~350℃ 
Dust content of inlet: <20g/Nm3、 
Dust content of outlet: <70mg/Nm3
1  
10 Gypsum crusher   Feeding size: <500mm 
Product fineness:<25mm 
motor: 110kW
1 70
11 Cement mill Φ4.2x12.5m Feeding size: <25mm 
Product fineness: 3200cm2/g 
Rotate speed: 15.8r/min. 
motor: 3000kW
   
12 Classifier O-Sepa, N-2500 Feeding capacity: max. 360t/h
Air volume: 2500m3/min. 
Motor : 130kW
  80~120t/h
13 Packing in bulk SZ-2 Output: ~200(per set) 4  
14 8 Nozzles Fixed Packing Machine   Output: 100(per set) 2  

 

  • 300,000 t/a
  • 600,000 t/a
  • 1,000,000 t/a
  • Equipments of Production Line

    Equipment Type: GRMS33.31 Slag Vertical RollerMill

    Power Consumption of system: 30 kWh/t

    Standard Production Capacity: 50 t/h

    Effective Diameter of Millstone: 3300 mm

    Number of Roller: 3

  • Equipment of Production Line

    Equipment Type: GRMS46.41 Slag Vertical Roller Mill

    Power Consumption of System: 38 kWh/t

    Standard Production Capacity: 105 t/h

    Effective Diameter of Millstone: 4600 mm

    Number of roller: 4

    Specific surface: 4200~4500cm2/g

  • Equipment of Production Line

    Equipment Type: GRMS53.41 Slag Vertical Roller Mill

    Power Consumption of System: 40 kWh/t

    Standard Production Capacity: 160 t/h

    Effective Diameter of Millstone: 5300 mm

    Number of Roller: 4

    Specific Surface: 4200~4500 cm2/g

  • 1,000 t/d Clinker
  • 2,500 t/d Clinker
  • 3,000 t/d Clinker
  • 4,000 t/d Clinker
  • 5,000 t/d Clinker
  • Production Line Equipments

    a. GRMR22.30 Raw Material Vertical Roller Mill

    b. GRMC12.30 Soft Coal Vertical Roller Mill

    c. φ3.2×48 Rotary Kiln

    d. φ3.8×13 Cement Mill

  • Production Line Equipments

    a. GRMR38.41Raw Material Vertical Roller Mill

    b. GRMC20.30Soft Coal Vertical Roller Mill

    c. φ4.0×60 Rotary Kiln

    d. φ4.2×13 Cement Mill (2 Sets)

  • Production Line Equipments

    a. GRMR40.41 Raw Material Vertical Roller Mill

    b. GRMC22.30 Soft Coal Vertical Roller Mill

    c. φ4.2×60 Rotary Kiln

    d. φ4.2×13 Cement Mill (2 Sets)

  • Production Line Equipments

    a. GRMR48.41 Raw Material Vertical Roller Mill

    b. GRMC23.30 Soft Coal Vertical Roller Mill

    c. φ4.5×66 Rotary Kiln

    d. φ4.2×13 Cement Mill (2 Sets)

  • Production Line Equipments

    a. GRMR53.41 Raw Material Vertical Roller Mill

    b. GRMC26.30 Soft Coal Vertical Roller Mill

    c. φ4.8×72 Rotary Kiln

    d. φ4.2×13 Cement Mill (3 Sets)



Order Online

Requirements
* Your Name
* Your E-mail
Telephone
Your Country
Message


Service & support

Contact Us

Top